Ground Loop Geothermal Systems

A residential/commercial alternative energy solutions company

Serving Pictou and Antigonish Counties

 

How Geothermal Works

Your own backyard has the potential to be an energy source for heating and cooling comfort. Outdoor air temperatures fluctuate throughout the year with the changing seasons. In contrast, ground temperatures about four to six feet below the Earth's surface remain relatively moderate and constant all year. That's because the Earth absorbs 47% of all the heat energy that reaches its surface from the sun. A geothermal system circulates a water-based solution through a buried loop system to take advantage of these constant temperatures. A single piece of equipment has the ability to heat and cool your home, while providing some or all of your home's hot water as well. Geothermal systems can save you 30% to 70% on your monthly utility bills.

The Heart of the System:
Geothermal Loops

Your loop system is the heart of geothermal technology. Regardless of the option you select, it will deliver over 300% efficient comfort and savings for many years into the future. Ground Loop Geothermal Systems will help you select the proper loop system based on a site survey and by conducting a detailed energy analysis of your home. Installing a geothermal loop system is like getting a 70% discount on energy for the life of your home.

Vertical Loop: This loop is used mainly when land area is limited and in retrofit applications of existing homes. A drilling rig is used to bore holes at of depth of 150 to 200 feet. A U-shaped coil of high density pipe is inserted into the bore hole. The holes are then backfilled with a sealing solution.

 

Horizontal Loop: This is the most common loop used when adequate land area is available. Loop installers use excavation equipment such as chain trenchers, backhoes and track hoes to dig trenches approximately 6-8 feet deep. Trench lengths range from 100 to 300 feet, depending on the loop design and application.

 

Pond Loop: A pond loop is an option if a large body of water is available within approximately 200 feet of the home. A ½ acre, 8 to 10 foot deep body of water is usually adequate to support the average home. The system uses coils of pipe typically 300 to 500 feet in length. The coils are placed in and anchored at the bottom of the body of water.

 

Open Loop: This system can be installed if an abundant supply of high quality well water is available. A typical home will require 4 to 8 gallons of water per minute. A proper discharge area such as a river, drainage ditch, field tile, stream, pond, or lake must be present. Check your local codes for restrictions before selecting a specific discharge method.

Drawings copyright Enertech Manufacturing. LLC

Home

Geothermal Systems

Solar Energy

Dollars and Sense

FAQs

About Us

Contact Us

glgs@ns.sympatico.ca

 

 

 

 

 

 

 

Vertical Loop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Horizontal Loop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pond Loop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Open Loop